36
7.4
RECEPTACLE WIRING DIAGRAM
EN
3 PRONGE
RECEPTACLE
(WHITE)
f i r e - p a r t s . c o m
7.5
REMOTE RECEIVER INSTALLATION
Receiver must be located
within 8 feet (2.4m) of this
side of the appliance and
must be accessible for
programming the remote.
Install the receiver into a
standard electrical switch
box. Determine an
appropriate location and
install the electrical box.
NOTE: Ensure the 3
position slider switch is
in the "REMOTE"
position (middle).
W415-0687 / G / 08.26.13
NOTE: RECEIVER WIRE IS BUNDLED UP IN THE CONTROL BOX AND
ELECTRICAL BOX
NEEDS TO BE INSTALLED REMOTELY. FOR INSTALLATION SEE
"REMOTE RECEIVER INSTALLATION" SECTION.
(BLACK)
WIRE NUTS
GROUND
(GREEN)
6 SCREWS
TO REMOTE RECEIVER
GROUND
(GREEN)
CONTROL
BOX
L1 (BLACK)
CABLE
CONNECTOR
SCREW
ELECTRICAL
L2 (WHITE)
BOX COVER