Turning On Your Monitor - Angelcare AC417 Manuel De L'utilisateur

4.2 TURNING ON YOUR PARENT UNIT
Your Camera and Parent Unit come pre‑paired.
1
When Parent Unit is turned ON and Camera is OFF, Parent Unit will display
Out‑of‑Range icon.
If there is a lost connection between the two units after 15 seconds, the Out‑of‑Range
alarm will sound on the Parent Unit (refer to Troubleshooting section):
• The Out‑of‑Range icon will appear on the screen and on the info bar.
INFO BAR IMPORTANT ICONS
Wireless Sensor Pad
Low Battery
Wireless Sensor Pad
Normal Status
Sensor Pad is
Paused
Sensor Pad Alert
Sensor Pad
Lost Link
4.3 ‑ HOW TO SET THE DATE
When activating the Parent Unit for the first time, you'll be asked to set the date and time
in order to record data. If you choose to skip this step, you can always go back later by
accessing the settings menu
2
22
1) Press and hold the Parent Unit ON/OFF button for
2 seconds until LCD screen is turned ON. Angelcare's
logo will be shown for 1 second.
Camera
displaying image
and sound
"TIC" icon
VOX icon
.
1
18°C
08 2016
The Camera connection signal
strength icon will appear in the
status bar.
Reception
Quality icons
Temperature
alerts icons
Too Cold
Too Warm
Out‑of‑Range
Fully charged
battery (only
appears when
Parent Unit is
plugged in
1) Tap the Date Mode toggle button to
switch between Month/Day/Year and
Day/Month/Year display.
2) Set the day, month and year using the
up/down arrows
Save button to confirm your settings.
Volume Level
icons
Battery Level
indicators
. Then tap the
E
N
67