Angelcare AC417 Manuel De L'utilisateur page 69

5.1 ‑ SENSOR PAD
TO ACTIVATE/DEACTIVATE THE SENSOR PAD:
2
TO TEST THE SENSOR PAD:
IMPORTANT
• Test your monitor before first use.
• Test your monitor regularly to ensure it is functioning correctly.
• Test your monitor every time you move the Sensor Pad to a different place.
MOVEMENT ALARM
• If NO movement is detected after 15 seconds
you will hear a single 'TIC' pre‑alarm sound
from the Camera.
• If after a further 5 seconds there is still NO
movement detected both the Parent Unit and
Camera speakers will emit loud continous
beeps ‑ this is the movement alarm.
• Movement Alarm icon will show on the
LCD screen.
PAUSING AND RESTARTING THE SENSOR PAD:
Allows you to pause the Sensor Pad if you remove baby from the cot, e.g. for feeding or
comforting.
IMPORTANT
• If you do not pause the Sensor Pad, the alarm will sound if there is no movement after
20 seconds.
• Ensure to unpause the Sensor Pad before putting baby in the cot.
18°C 18°C
3
1) After activating the Sensor Pad, the alarm will
sound after 20 seconds.
2) Rub you hand over the mattress and confirm
the alarm stops.
PAUSE/UNPAUSE
Sensor Pad Buttons
1) Tap the Settings icon
display view.
2) Tap the Sensor Pad icon
3) Tap the Sensor Pad toggle button to
activate/deactivate the Sensor Pad (when
activated the toggle will turn blue). Then tap
the Save button to confirm your settings.
IF THE ALARM DOES NOT SOUND
• Avoid contact with the cot while
Sensor Pad is in operation.
• Place the cot near a supporting wall
to reduce vibrations.
• Adjust the Sensor Pad sensitivity
level.
• Turn OFF cot mobile, fans, loud
music or anything else that may
cause vibration.
18°C
in the video
.
E
N
69