Angelcare AC417 Manuel De L'utilisateur page 77

18°C
2
LOST OF CONNECTIVITY BETWEEN THE SENSOR PAD AND THE CAMERA
• If your Sensor Pad becomes un‑paired from your Camera, please follow the steps below to re‑pair them.
2
NO SOUND IS BEING TRANSMITTED
• Check the volume level on the Parent Unit and the Camera to ensure they are set to an appropriate level.
• Try bringing the Parent Unit closer to the Camera to see if you get sound.
• Charge the Parent Unit.
WEAK RECEPTION
• Bring units closer together.
• Change the position of one or both units.
• Place units on a flat surface away from baby's reach.
• Recharge the Parent Unit.
STATIC, DISTORTION, INTERFERENCES
(FROM OTHER MONITORS, WIRELESS PHONES, WALKIE‑TALKIES, ETC.)
• Rotate Parent Unit or move it away from source of interference.
FEEDBACK (LOUD NOISES EMITTED FROM THE PARENT UNIT)
• Move units farther apart (at least 3 metres).
• Decrease volume on Parent Unit.
1) Tap the Settings icon
2) Tap the Pairing icon
3) Tap the Trash can icon
Camera 1. If the Trash can icon
the icon
3
4) Press and hold the Pause / Pairing button on the
top right of the Camera for 2‑3 seconds.
5) When the Trash can icon
18°C
18°C
18°C
3
in the video display view.
to enter the device pairing menu.
to pair the Camera 1.
The Parent Unit Power Indicator
will flash to indicate it's in
linking mode.
1) Tap the Settings icon
display view.
2) Tap the Pairing icon
pairing menu.
3) Tap Trash can icon
Sensor Pad if the Trash can icon
appears, then tap the icon
Sensor Pad.
The Parent Unit Power Indicator
will flash to indicate it's in
linking mode.
4) Tap the icon to pair the Sensor Pad.
5) When the Trash can icon
Sensor Pad is paired.
to delete the paired
appears, then tap
appears, the Camera is paired.
in the video
to enter the device
to delete the paired
to pair the
appears, the
E
N
77