ST Quadrat LUX-top FSE 2003 Instructions De Montage Et D'utilisation page 31

Combination with other LUX-top
Possible final / intermediate anchor points and number of users in the system
PRODUCT DESIGNATION
LUX-top ASP
®
LUX-top FALZ-PLUS/
®
LUX-top RVT/
®
LUX-top ONE/
®
LUX-top DUO
®
LUX-top GBD
®
LUX-top mobilE
®
LUX-top SZH
®
(direct assembly)
For the system LUX-top
**)
in two directly adjacent fields.
Combining different products is possible.
After prior agreement with the manufacturer, the assembly of the system can also be carried out
directly on steel structures and concrete components with sufficient load-bearing capacity.
If you have any questions, please contact the manufacturer.
Possible distances of the anchor points between each other with the system
PRODUCT DESIGNATION
LUX-top ASP
®
LUX-top FALZ-PLUS/
®
LUX-top RVT/
®
LUX-top ONE/
®
LUX-top DUO/
®
LUX-top GBD
®
LUX-top mobilE
®
If you are at all uncertain, please contact the manufacturer
In addition, always follow the instructions for use of the respective products!
IMPORTANT: If the distance between the anchor device and the falling edge is below 2,5 m, the distance
between the anchor points must be reduced in order to prevent the deflection of the stainless steel rope over the
falling edge in case of a fall of a secured person!
*)
When using the system in Germany, the information provided in the national technical approval Z-14.9-789 must be
observed. This generally limits the permissible spacing between each anchor point to a max. of 10 m.
ST QUADRAT Fall Protection S.A.
®
products:
MAX. NUMBER OF USERS
•
**)
6 persons
•
**)
6 persons
•
3 persons
•
2 persons
•
depending on the respective system
–
® FSE 2003 traversable a maximum of 5 persons can be secured simultaneously
–
Your competent partner for fall protection
Page 5 Version 04/2017
MISCELLANEOUS
Start end and corner anchors must be Ø
26.0 mm!
All brackets are identical
LUX-top® GBD - Zwischenpunkt
installed as an intermediate anchor for
lifelines running parallel with the eaves.
LUX-top® mobilE - Zwischenpunkt
be installed as an intermediate anchor
only suitable as an intermediate bracket
**)
DISTANCE BETWEEN EACH OTHER
Maximum 10 m
(generally recommended)
Maximum 15 m
(according to type examination certificate)
Maximum 7.5 m
(generally recommended)
Maximum 15 m
(according to type examination certificate)
Maximum 7.5 m
–
www.lux-top-absturzsicherungen.de
LUX-top ® FSE 2003 *)
can be
can
*)
LUX-top ® FSE 2003 *)