TECO 302 Série Traduction Des Instructions Originales page 105

Fig. 9a
Fig. 9c
Fig. 9b
6.5 Bumping risk
When the lift is stopped at relatively low height for
working, the risk of bumping against projecting parts occurs.
Fig. 10
6.6 risk of the vehicle falling from the lift
Vehicle falling from the lift can be caused when the vehicle is improperly placed on
platforms, and when its dimensions are incompatible with the lift or by excessive mo-
vement of the vehicle.
In this case, keep immediately away from the working area.
UK
Fig. 11a
Fig. 11b
Fig. 11c
6.7 Slipping risks
The risk of slipping can be caused by oil or dirt on the
floor near the lift.
Fig. 12
Operator's manual 105