Internal Calls - switel DCIP 48S Mode D'emploi

Dialling numbers from the phone book
Phone numbers must have been stored in the phone book for this function.
. Page 153.
¤
+ or ,, ƒ or ™
1

Internal calls

69
Making an internal call
There must be two or more handsets (HS1, HS2, ...) registered on your base
station in order to make internal calls free of charge.
HS1: , + or ,
Call internal
HS2: ƒ
HS1/HS2: ‹
Forwarding external calls internally
HS1: , + or ,
Call internal , , e.g.: 2
HS2: ƒ
HS1: ‹
If the handset called does not answer, take the external call back by
pressing the ‹ button.
Holding a call / brokering
While a call is in progress, it is possible to dial another handset in order to con-
sult with someone. The external caller is put on hold while you converse with the
second, internal person called. You can switch between the callers as often as
necessary.
HS1: , + or ,
Call internal , , e.g.: 2
1
Internal calls are only possible when at least two handsets are registered in
the system; . Checking the contents of the package" on Page 130.
Telephoning Using a PSTN
, , e.g.: 2
Open the phone book
Select an entry and dial the number
Dial the internal call number of the
required handset
Take the call on the other handset
End the internal call
Dial the internal handset call number
during the external call
Take the call on the other handset
Forward the call
Dial the internal handset call number
during the external call
141