Configuration - switel DCIP 48S Mode D'emploi

4 Configuration

All the necessary configurations for the telephone are made via the application
software used or your operating system.
If this is not done automatically, please carry out the following steps.
The names of the menu items and buttons may vary slightly according
to the operating system being used, e.g.: Sound and audio devices =
Multimedia. The steps for installation, however, are identical.
Configuring Skypet
Open the Skypet application.
Select Tools, Options and then Sound Devices.
Select your USB Phone from the Sound Device pulldown menu. Complete this
process for both the Audio Out as well as the Audio In.
Click on the Save button to apply the settings and close the pulldown menu.
Refer to the instructions in your application software for further, more
detailed information.
Configuring Windows XP / 2000
This is used to select the devices you want for other audio applications (e.g. Win-
dows Sounds).
Open the Start menu.
Select Settings, Control Panel and then Sounds and Audio Devices.
Click on the Audio tab control.
Select the device to be used from the Default device pulldown menu. Complete
this process for both the Sound playback as well as the Sound recording.
Click on the OK button to apply the settings and close the pulldown menu.
Please refer to the operating system documentation for further, more
detailed information.
Configuration
135