Engine Trouble Alert; 6Y8 Multifunction Meters; 6Y8 Multifunction Tachometers - Yamaha F200 Manuel De L'utilisateur

Instruments and indicators
EMU41711

Engine trouble alert

The pop-up window will appear if the engine
malfunctions while cruising. Press the "
(set) button to change to normal display, and
the engine trouble-alert indicator will start to
blink.
Return to port and consult a Yamaha dealer
immediately.
EMU31654

6Y8 Multifunction meters

Multifunction meters have 6 kinds of meter
units; tachometer unit (square or round
types), speedometer unit (square type),
speed & fuel meter unit (square or round
types), and fuel management meter (square
type). The indicator system is slightly different
between the round and square types. Check
the model and type of your unit carefully. This
manual describes mainly the alert indicators.
41
For more details on setting meters or chang-
ing indicator systems, see the attached oper-
ation manual.
"
EMU36185

6Y8 Multifunction tachometers

The tachometer shows the engine revolutions
per minute. It has functions of trim meter, ad-
justing trolling speed, cooling water/engine
temperature display, battery voltage display,
total hour/trip hour display, oil pressure dis-
play, water detection alert, engine trouble
alert, and periodic maintenance notification.
If the cooling water pressure sensor is in-
stalled, the unit can also show the cooling
water pressure display. However, even if the
cooling water pressure sensor is not in-
ZMU07253
stalled, the cooling water pressure display
can be shown by connecting an optional sen-
sor to the unit. For the optional sensor, con-
sult your Yamaha dealer. The tachometer unit
is available in round or square types. Check
your tachometer unit type.
ZMU07254
1
1. Set button
2. Mode button
2
ZMU05415