Installation Kit Components - Nordson ProBlue P4 Manuel

Installation Kit Components

Figure E‐2 Installation Kit
1. Voltage plug, 400 volt (Black wires)
2. Voltage plug, 480 volt (White wires)
E 2011 Nordson Corporation
The following components are shipped with the transformer.
NOTE: These components are in addition to the components that are
provided in the melter installation kit.
3. Conduit plate
4. Cable clamp
400/480 Volt ProBlue Adhesive Melters
5. M5 x 10 screws
6. M5 Washers
E‐7
Part 1024496_05