Operation - Brinly SA2-40BH1-G Guide D'utilisation

CAUTION: Keep body parts away from under drawbar.
Do not attempt to disconnect Aerator from towing vehicle with weight on the tray.
INSTALLING
1. Park towing vehicle safely and
set the parking brake (See
towing vehicle operator's
manual).
2. Align Aerator Clevis (20) with
towing machine hitch plate.
3. Install Hitch Pin (16)
through Clevis (20) and
towing machine hitch
plate. Secure Hitch Pin
(16) with Hairpin Cotter
(18).
USAGE
CAUTION: AVOID INJURY!
Avoid damage to tines. Do not tow
the aerator across concrete or asphalt
driveways and walkways.
CAUTION: Excessive towed load can
cause loss of control on slopes. Stopping
distance increases with speed and the
weight of the towed load.
CAUTION: Total towed weight must
not exceed combined weight of towing
vehicle, ballast and operator.
English Manual

OPERATION

REMOVING
1. Park towing vehicle safely
and set the parking brake
(See towing vehicle
operator's manual).
2. Unload weight from the
Aerator tray.
3. Remove Hairpin Cotter (18)
and Hitch Pin (16).
4. Push Aerator away from
the towing vehicle.
5. Install Hitch Pin (16)
and Hairpin Cotter (18) for
storage.
AERATOR WEIGHT
The following maximum loaded weight capacity is the
weight of the Aerator plus the maximum weight loaded into
the Aerator Tray:
Model SA2-40BH1-G
Maximum Tray Weight
Maximum Towed Weight
12
Weight
25 lbs (empty)
110 lbs
__________
135 lbs
1019097-B