Step 3
Slide a Cotter Pin (19)
through the end of
the Tine Shaft (2). Using
pliers, bend the ends
over to secure the pin
in place.
Step 4-A
CAUTION:
GLOVES ARE REQUIRED WHEN
HANDLING AERATOR TINES.
Tines have extremely sharp points.
Use caution when handling.
English Manual
ASSEMBLY
Place a 5/8" Flat
Washer (15) on the Tine
Shaft (2) and push the
shaft through one End
Panel (1).
NOTE: The Bearings (9)
have two small openings and
extensions. These are designed to
sandwich the Tines (8), sliding
through and connecting.
Add a Square Bearing (17) and a
5/8" Flat Washer (15) on the Tine Shaft (2)
as illustrated.
9
x10
9
9
8
1019097-B