Jacuzzi Espree Série Instructions D'installation Et De Fonctionnement page 15

RapidHeat Operation
TM
once the heater is installed and the whirlpool pump is
operating, the heating function is totally automatic. the
heater will help maintain the temperature of the water
in the bath. the heater is designed to help maintain the
temperature of the bath water once the water is added
at the desired temperature level. It does not replace the
need to have adequate hot water supply for the filling
of the bath.
Vacuum Switch
the heater is equipped with a preset vacuum switch
which will not allow the heater to turn oN if the pump
is not running with water flowing through the whirlpool
system.
High-Limit Switch
The heater includes an exclusive High-Limit switch.
this safety circuit will not false trip from hot tap water.
It will only turn off the heater if the thermostat fails. to
reset, press the button. If the high-limit trips frequently,
contact your authorized electrical/Mechanical Service
Provider. visit our web site at http://www.jacuzzi.com/
to find a Service Provider.
Heater On Indicator
the light will be illuminated any time the heater is
operating.
HIGH LIMIT RESET
OVER HEAT
PROTECTION
PUSH TO RESET
Back Massage Jet - Flow Adjustment
����
Copyright © 2007 by Jacuzzi Whirlpool Bath
OPERATION
HEATER ON
HEATER ON
�����
1
Controlling Whirlpool Action
The whirlpool action in your bath is influenced by three
factors – direction of flow, force of water, and force of
air. all baths manufactured by Jacuzzi Whirlpool Bath
are equipped with fully adjustable PowerPro
are adjustable for all three factors. Some baths have
additional directionally adjustable jets which can be
adjusted for direction and flow of air only.
Direction: To change the direction of the water flow,
swivel the jet nozzle to the desired angle. The jets can
be directed individually toward any location on your
body to provide a hydromassage. The jets can also
be adjusted so that they all point in the same direction
(clockwise or counterclockwise) to circulate the water
in a circular motion around the bath, causing a total
whirlpool effect.
Water Force: The high volume, fully adjustable jets
can be adjusted to control the force of the water coming
into the bath. For robust action, increase the force of the
flow by rotating the jet handles to the left (counterclock-
wise). For a more gentle effect, rotate the handles to
the right (clockwise). Never run the whirlpool system
with all the jets closed.
Force of Air: two knobs located on the bath serve
as controls for the air induction system. the intensity
of the hydromassage whirlpool action is determined by
the amount of air inducted into the water. as the amount
of air is increased, the hydromassage action increases.
For maximum air induction, rotate the control knobs fully
counterclockwise to the largest circles. For fewer air
bubbles, decrease the amount of air induction by rotating
the control knob clockwise. When the knobs are turned
to the smallest circles, only water is being circulated.
JETS
DIRECTIONALLY
ADJUSTABLE
AIR INDUCTION CONTROLS
T URN CLOCKWISE TO
REDUCE AIR FLOW
jets, which
®
FULLY
ADJUSTABLE
TURN COUNTER-CLOCKWISE
TO INCREASE AIR FLOW
U961000K 06/07