Maintenance; Reset Function; Optional Equipment; Storage - RIDGID micro CA-350 Mode D'emploi

micro CA-350 Inspection Camera

Maintenance

WARNING
Remove battery before cleaning.
• Always clean the imager head and cable
after use with mild soap or mild detergent.
• Gently clean the display screen with a
clean dry cloth. Avoid rubbing too hard.
• Use only alcohol swabs to clean the cable
connections.
• Wipe the hand held display unit down with
a clean, dry cloth.

Reset Function

If the unit stops functioning and does not op-
erate, press the Reset Button (under the left
side port cover – Figure 4). The unit may re-
cover to normal operation when re started.

Optional Equipment

WARNING
To reduce the risk of serious injury, only
use equipment specifically designed
and recommended for use with the
RIDGID micro CA-350 Inspection Camera
such as those listed below. Other equip-
ment suitable for use with other tools
may be hazardous when used with the
micro CA-350 Inspection Camera.
Catalog
No. Description
37108 3' (90 cm) Cable Extension
37113 6' (180 cm) Cable Extension
37103 Imager Head and Cable - 17 mm
37098 1 m length 6mm diameter imager
37093 4 m length 6mm diameter imager
37123 17 mm Accessory Pack (Hook,
Magnet, Mirror)
36758 AC Adapter
40623 Headset Accessory with
Microphone
14
RBC-121 Chargers and Cords
Catalog
No.
55193 Charger USA, Canada and Mexico
55198 Charger
55203 Charger
55208 Charger Australia & Latin America
55213 Charger
55218 Charger
44798 Charger Cord
44808 Charger Cord
44803 Charger Cord
44813 Charger Cord
44818 Charger Cord
44828 Charger Cord
Batteries
Catalog
No. Model
55183 RB-1225
All listed batteries will work with any catalog number RBC-121
Battery Charger.
For a complete listing of RIDGID equipment
avail able for this tool, see the Ridge Tool Cata -
log online at RIDGID.com or call Ridge Tool
Technical Services (800) 519-3456.

Storage

The RIDGID micro CA-350 Inspection Cam era
must be stored in a dry secure area between
-4°F (-20°C) and 140°F (60°C) and humidity
between 15% and 85% RH.
Store the tool in a locked area, out of the
reach of children and people unfamiliar with
the micro CA-350 Inspection Cam era.
Remove the battery before storage or ship-
ping.

Service and Repair

WARNING
Improper service or repair can make the
RIDGID micro CA-350 Inspection Camera
unsafe to operate.
Service and repair of the micro CA-350 In -
spec tion Camera must be performed by a
RIDGID In dependent Authorized Service
Center.
For information on your nearest RIDGID In -
depen dent Service Center or any service or
repair questions:
Plug
Region Type
A
Europe C
China A
Japan A
United Kingdom G
North America A
Europe C
China A
Australia & LA
Japan A
United Kingdom G
Capacity
12V 2.5Ah
I
I