Maintenance Instructions; Cleaning; Accessories; Transport And Storage - RIDGID SeeSnake MINIPak Mode D'emploi

The Color, Contrast, and Brightness choices increase
and decrease the value of the appropriate display char-
acteristic on a sliding scale.
The Units option toggles between Auto-detection, Feet,
and Meters for the unit of measurement used in display-
ing distance counts. Auto-detection (Compact reel only)
detects the type of camera (NTSC or PAL) and auto-
matically sets the units to feet (NTSC) or meters (PAL).

Maintenance Instructions

Cleaning

WARNING
Make sure all cords and cables are disconnected
and the battery removed prior to cleaning the
MINI Pak to reduce the risk of electrical shock.
Do not use liquid or abrasive cleaners on the MINI Pak .
Clean the MINI Pak with damp cloth. Only use cleaners ap-
proved for use on LCD screens to clean the screens.
Do not allow any liquid to enter the MINI Pak .

Accessories

WARNING
The following accessories have been designed to
function with the MINI Pak . Other accessories suit-
able for use with other equipment may become
hazardous when used with the MINI Pak . To reduce
the risk of serious injury, only use accessories
specifically designed and recommended for use
with the MINI Pak , such as those listed below.
Catalog #
Description
US EU
32743 28218 18 V Li-Ion rechargeable battery
32068 32073 Battery charger
32648 32693 Dual battery kit with charger
32708 32713 Single battery kit with charger
Various RIDGID SeekTech
Various RIDGID SeekTech
Transmitters

Transport And Storage

Remove batteries before shipping. Do not expose to
heavy shocks or impacts during transport. If storing for an
extended period, remove batteries. Store within temper-
ature range of 14°F to 158°F (-10°C to. 70°C).
Store electrical devices in a dry place to reduce the risk of
electrical shock.
® or NaviTrack ® Locator
® or NaviTrack ®
Ridge Tool Company
SeeSnake
Protect against excessive heat. The unit should be situ-
ated away from heat sources such as radiators, heat
registers, stoves or other products (including amplifiers)
that produce heat.

Service And Repair

WARNING
Improper service or repair can make the MINI Pak
unsafe to operate.
Service and repair of the MINI Pak must be performed by
a RIDGID Independent Authorized Service Center.
For information on your nearest RIDGID Independent
Service Center or any service or repair questions:
• Contact your local RIDGID distributor.
• Visit www.RIDGID.com or www.RIDGID.eu to find
your local Ridge Tool contact point.
• Contact Ridge Tool Technical Services Department
at rtctechservices@emerson.com, or in the U.S. and
Canada call (800) 519-3456.

Disposal

Parts of the unit contain valuable materials and can be re-
cycled. There are companies that specialize in recycling
that may be found locally. Dispose of the components in
compliance with all applicable regulations. Contact your
local waste management authority for more information.
For EC Countries: Do not dispose of
electrical equipment with household
waste!
According to the European Guideline
2002/96/EC for Waste Electrical and
Electronic Equipment and its implemen-
tation into national legislation, electrical equipment that is
no longer usable must be collected separately and dis-
posed of in an environmentally correct manner.

Battery Disposal

For USA and Canada: The RBRC™
(Rechargeable Battery Recycling Cor-
poration) Seal on the battery packs
means that RIDGID has already paid
the cost of recycling the lithium-ion
battery packs once they have reached
the end of their useful life.
RBRC™, RIDGID ® , and other battery suppliers have de-
veloped programs in the USA and Canada to collect and
® MINI Pak
11