Time Stamp; Language; Date/Time; Tv-Out - RIDGID micro CA-350 Mode D'emploi

micro CA-350 Inspection Camera
Figure 17 – Settings Screen
Playback Mode
1. Pressing the Select button
screen will enter playback mode. Select
either Image or Video to playback the
desired file. The playback mode is the
interface into saved files. It will default to
the last file recorded.
2. While reviewing the image the user will be
able to cycle through all saved images,
delete an image and display file informa -
tion.
3. While reviewing a video, a user will be
able to navigate through videos, pause,
restart and delete. A user will only be
able to playback images and video from
internal memory when SD™ Card is not
inserted.
Deleting Files
Press Menu button
mode to delete the image or video. The
delete confirmation dialog allows the
user to delete unwanted files. The ac-
tive icon is outlined in red. Navigation is
done with the arrow buttons

Time Stamp

Enable or Disable the display of the Date and
Time.

Language

Select the "Language" icon in the menu and
press Select. Select different languages with
up/down arrow buttons
to save the language setting.

Date/Time

Select Set Date or Set Time to set the current
date or time. Select Format Date or Time to
change how the date/time is displayed.
12
in the live
while in playback
.
, then press Select

TV-Out

Select the "NTSC" or "PAL" to enable the TV-
Out for the video format required. Screen will
go black and image will be transmitted to exter-
nal screen. To get live image on unit, hit Power
button to disable function.

Update Firmware

Select Update Firmware to install the latest
version of software on the unit. Software will
have to be loaded onto a SD™ Card and in-
serted in to the unit. Updates can be found at
RIDGID.com.

Speaker

Select the Speaker icon in the menu and press
Select . Select ON or OFF with up/down
button to keep the speaker ON or OFF dur-
ing video playback.

Auto Power Off

Select the Auto Power Off icon and press se-
lect . Select disable to turn OFF the auto -
ma tic shut down function. Select the 5 Minutes,
15 Minutes or 60 Minutes to turn OFF the tool
upon 5/15/60 minutes of non-operation. Auto -
matic shut down setting will not be activated
when recording or playing video.

Factory Reset

Select the Reset icon and press Select
Confirm the reset function by selecting Yes
and press Select
tool to the factory set up.

About

Select the About function to display the firm -
ware revision of the micro CA-350 as well as
the software copyright information.
Transferring Images to a
Computer
With the unit powered ON, connect the micro
CA-350 to a computer using the USB cable.
The USB connected screen is displayed on the
micro CA-350. The internal memory and SD™
card (if applicable) will appear as separate
drives on the computer and are now accessi-
ble as a standard USB storage device. The
copy and delete options are available from
computer operation.
again. This will reset the
.