Maintenance; Cleaning; Reset Function; Accessories - RIDGID micro CA-100 Mode D'emploi

micro CA-100 Inspection Camera
Figure 9 - TV-OUT Jack/Reset Button

Maintenance

WARNING
Remove batteries before cleaning.

Cleaning

• Always clean the imager head and cable
after use with mild soap or mild deter-
gent.
• Gently clean the LCD with a clean dry
cloth. Avoid rubbing too hard on the
LCD.
• Use only alcohol swabs to clean the ca-
ble connections.
• Wipe the hand held display unit down
with a clean, dry cloth.

Reset Function

If the unit stops functioning and does not
operate, press the Reset Button. (See Figure
9). The unit may recover to normal operation
when restarted.

Accessories

WARNING
To reduce the risk of serious injury, only use
accessories specifically designed and rec-
ommended for use with the RIDGID micro
CA-100 Inspection Camera such as those
listed below. Other Accessories suitable
for use with other tools may be hazardous
when used with the micro CA-100 Inspec-
tion Camera.
10
micro CA-100 Inspection Camera
Accessories*
Catalog
No.
Description
31128 3' Cable Extension
31133 6' Cable Extension
37103 Imager Head and Cable - 17 mm
(*List subject to change.)

Storage

The RIDGID micro CA-100 Inspection Camera
must be stored in a dry secure area between
-20°C (-4°F) and 60°C (140°F).
Store the tool in a locked area out of the
reach of children and people unfamiliar with
the micro CA-100 Inspection Camera.
Remove the batteries before any long period
of storage or shipping to avoid battery leak-
age.

Service and Repair

WARNING
Improper service or repair can make the
RIDGID micro CA-100 Inspection Camera un-
safe to operate.
Service and repair of the micro CA-100 In
spection Camera must be performed by a
RIDGID Independent Authorized Service
Center.
For information on your nearest RIDGID In-
dependent Service Center or any service or
repair questions:
• C ontact your local RIDGID distributor.
• V isit www.RIDGID.com or
www.RIDGID.eu to find your local
RIDGID contact point.
• C ontact RIDGID Technical Services De-
partment at rtctechservices@emerson.
com, or in the U.S. and Canada call (800)
519-3456.