Operating Information - Invacare SOLO2 TPO100 Manuel D'utilisation

SECTION 1—GENERAL GUIDELINES
DANGER
Avoid creation of any spark near medical oxygen
equipment. This includes sparks from static electricity
created by any type of friction.
DO NOT move or relocate concentrator by pulling on the
cord.
A product should NEVER be left unattended when plugged
in. Make sure the transportable oxygen concentrator is Off
when not in use.
Outdoor use of the transportable oxygen concentrator MUST
be conducted with battery power only.

Operating Information

The transportable oxygen concentrator can only be used in
conjunction with PAP, Bi-Level or other such devices when in
continuous flow mode.
If the transportable oxygen concentrator is not working
properly, if it has been dropped or damaged, or dropped into
water, call equipment provider/qualified technician for
examination and repair.
If you feel ill or uncomfortable, or if the unit does not signal
an oxygen pulse and you are unable to hear and/or feel the
oxygen pulse while in pulse flow mode or you cannot hear or
feel flow when in continuous flow mode, consult your
equipment provider and/or your physician IMMEDIATELY.
NEVER drop or insert any object or liquid into any opening.
DO NOT use extension cords with AC power adaptors
provided.
For optimum performance, Invacare recommends that each
concentrator be on and running for a minimum of 5 minutes.
Shorter periods of operation may reduce maximum product
life.
The transportable oxygen concentrator is designed only to be
used with a humidifier while using continuous flow mode.
Use of this device with a humidifier in pulse flow mode may
impair performance and/or damage the equipment.
Invacare SOLO ™ 8 Part No 1163190
2