Section 6-Operating Instructions; Location; Recommendations For Optimal Performance; Filters - Invacare SOLO2 TPO100 Manuel D'utilisation

Masquer les pouces Voir aussi pour SOLO2 TPO100:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 149
SECTION 6—OPERATING INSTRUCTIONS
SECTION 6—OPERATING
INSTRUCTIONS

Location

NEVER block the air opening of the product or place it on a
soft surface, such as a bed or couch, where the air opening may
be blocked. Keep the openings free from lint, hair and the like.
Keep unit at least 3 in (7.6 cm) away from walls, draperies,
furniture, and the like.
Locate and position the transportable oxygen concentrator in a well
ventilated space so that the air intake and the air exhausts are not
obstructed.

Recommendations for Optimal Performance

Operating Temperature:
Relative Humidity:
Transport/Storage Temperature:
Electrical:
Altitude:
Tubing and Cannula:
Environment:
Time of Operation:

Filters

Air enters the transportable oxygen concentrator through an air intake filter
located on the left side of the unit. This filter prevents hair and other large
particles in the air from entering the unit. Before you operate the
transportable oxygen concentrator, make sure the filter is clean, dry and
properly positioned.
To clean/replace the air intake filter, refer to Cleaning, Care, And
Maintenance on page 31.
Invacare SOLO
2
WARNING
41°F to 95°F (5°C to 35°C)
15% to 60%
-2°F to 140°F (-20°C to 60°C)
Allow unit to warm, or cool, to operating
temperature range before using.
No extension cords.
Up to 10,000 ft (3046 m) above sea level.
7 ft (2.1 m) crush resistant cannula
(DO NOT pinch).
Smoke, pollutant and fume free. No confined
spaces (example: no closets).
Up to 24 hours per day when connected to AC or
DC power.
18
Part No 1163190

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Solo2 tpo100bSolo 2Tpo100Tpo100b

Table des Matières