Invacare SOLO2 TPO100 Manuel D'utilisation page 20

SECTION 6—OPERATING INSTRUCTIONS
2. To operate from external power (AC or DC) please follow the steps
below:
A. Turn off the transportable oxygen concentrator.
B. Connect the external power supply (DC power cable or AC power
adapter) to the transportable oxygen concentrator.
C. Perform one of the following:
• Plug the other end of the AC power adapter into a wall outlet.
• Plug the other end of the DC power cable into the auto
accessory outlet and start the engine.
D. Turn the transportable oxygen concentrator on.
DETAIL "B" - DC POWER CABLE
Transportable
Oxygen DC Power
Cable
FIGURE 6.1 Powering the Transportable Oxygen Concentrator
Invacare SOLO ™
2
DETAIL "A" - BATTERY MODULE
Transportable
Oxygen
Concentrator
Battery
Connections
Battery
Module
(Installed)
Connect to DC
Power Source
20
DETAIL "C" - AC POWER
ADAPTER
Transportable Oxygen
Concentrator
AC Power Adapter
Battery Module
(Removed)
Connect to AC
Power Source
Part No 1163190