Invacare SOLO2 TPO100 Manuel D'utilisation page 28

SECTION 6—OPERATING INSTRUCTIONS
FIGURE 6.7 LCD Adjustment Screen
Once this screen is displayed, use the Mode/Return/Highlight and the
Increase/Decrease buttons to move the highlight bar and make changes. See
the section on Control /Adjustment buttons.
Saving Changes to LCD
When making changes to values on the LCD Adjustment screen the change
is stored only by using the Mode/Return/highlight button to move back to
highlighting the setting name.
If no button is pressed for 20 seconds and the highlight bar has not been
returned to the setting name, the display will return to the Normal
Operating screen automatically without saving the change.
Warning & Alarm Screens
On occasion, even when operating normally, the internal monitoring of the
transportable oxygen concentrator will need to provide a warning, or alarm,
message to the user. These messages are usually shown in conjunction with
the audible alarm and Indicator LEDs. Samples of both the Warning and the
Alarm screens are shown below.
Typical Warning Screen
Typical Alarm Screen
FIGURE 6.8 Warning & Alarm Screens
NOTE: For detailed explanation and descriptions of the transportable oxygen
concentrator warnings and alarms please see Warnings and Alarms on page 36
and/or Troubleshooting on page 34.
Invacare SOLO ™ 28 Part No 1163190
2