ST Quadrat LUX-top FSA 2010 – V Manuel De Montage Et D'utilisation page 36

VII. Installing a ladder step wide
a. Thread the screw heads into the rail profile
b. Tighten the nuts until the spring lock washer lies flat.
VIII. Installing other brackets (here U-30 mm) onto the rail profile
a. The bracket must be fixed onto the substructure according to the manufacturer's
specifications for the respective fixings (e.g. Fischer concrete anchor FAZ II M12
A4).
b. Thread the rectangular clamping nut into the rail profile
c. Fix the rectangular clamping nut onto the bracket
d. Tighten the screw until the spring lock washer lies flat
ST QUADRAT Fall Protection S.A. – Your competent partner for fall protection – www.st-quadrat.lu
Installation spacings:
A = 250 mm
min
Bracket (here U-30 mm)
1
2 Rectangular clamping nut
Spring lock washer M10 A2
3
4 Hexagon screw
for bracket t = 10 mm M10 x 25 A2-70
for bracket t = 6 mm
for bracket t = 5 mm
5 Rail profile
page 17 version 02/15
A = 300 mm
max
M10 x 22 A2-70
M10 x 20 A2-70