ST Quadrat LUX-top FSA 2010 – V Manuel De Montage Et D'utilisation page 34

V. Installing a ladder stile holder
a. Thread the screw heads into the rail profile
b. Screw the clamping plates tightly onto the ladder stile (see Fig.)
c. Lock the threaded connection by screwing tight the additional lock nuts
Max. distance between fixings: 1.75 m
1 Inner plate, ladder stile holder
2 Outer plate, ladder stile holder
3 Hexagon nut
4 Washer
5 Hexagon screw
6 Hexagon screw
ST QUADRAT Fall Protection S.A. – Your competent partner for fall protection – www.st-quadrat.lu
M10
M10
M10 x 80
M10 x 35
page 15 version 02/15
Final:
A2
A2
A2
A2