ST Quadrat LUX-top FSA 2010 – V Manuel De Montage Et D'utilisation page 25

Inserting the guided type fall arrester
a. Endpiece type 2, top
Insert the guided type fall arrester in the rail as shown in the Figure and push it
over the flap of the top endpiece, which closes again automatically. The flap
prevents the guided type fall arresters from being inserted in the wrong direction
and prevents accidental removal of the slider during use.
b. Endpiece Type 2, bottom
Insert the guided type fall arrester in the rail as shown in the Figure and push it
over the flap of the bottom endpiece, which closes again automatically. The flap
prevents the guided type fall arresters from being inserted in the wrong direction
and prevents accidental removal of the guided type fall arrester during use.
ST QUADRAT Fall Protection S.A. – Your competent partner for fall protection – www.st-quadrat.lu
page 6 version 02/15