BH S1Ri Guide D'utilisation page 19

STEP 7
1) Mate Cable Connector (upper) (B-
2) to (A-3) Computer Cable and then
connect Heart Rate Cables (upper)
(B-3) to Computer (A-1) (See Figure 1).
When connecting the Heart Rate Cables
there is not a left or right cable, connect
either side.
2) Install the Computer (A-1) to the
computer bracket which is welded on
the top of the handlebar post. Secure the
computer with 4 screws (A-2).
3) While seated, lift the seat adjustment
bar located under the right side of the
seat. Using your legs, slide the seat
forward or backward until in the correct
position. Once the correct position is
set, release the seat adjustment bar to
lock the seat in place.
4) For electric power, plug in the
Adapter (R-5) into the front of the
machine.
MOVING THE MACHINE
To move the machine to a new location, tilt the bike forward and roll the machine on the transport wheels.
19