BH S1Ri Guide D'utilisation page 15

STEP 3
1) Secure the Handlebar (C-1) to the bracket which is welded on the handlebar post by using the
Mounting Clamp (T-3), 2 Flat Washer (T-4), 2 Spring Washer (T-5) and 2 Screws (T-6).
2) Put the Cover for the handlebar (R-3) onto the handlebar.
3) To adjust the handlebar angle, remove the plastic cover (R-3), loosen the Allen Screws (T-6), and rotate
the handlebar to the desired position. Be sure the knurling is seated properly and retighten.
15