Rear Panel Connections And Controls - Arcam HDA SA10 Manuel

Rear Panel Connections and Controls

POWER INLET
Connect the correct Ensure that the voltage selected
mains cable here matches the local power supply
POWER INLET
SUPPLY
VOLTAGE
SWITCH POSITIONS
110-120V/220-240V ~ 50/60Hz 115 = 110 - 120V ~
230 = 220 - 240V ~
NETWORK
Connect this socket to a port on your network
router using an Ethernet patch cable
See "Network Connection" on page EN-9
POWER INLET
SUPPLY
VOLTAGE
RS232
SWITCH POSITIONS
This connection allows for remote control
110-120V/220-240V ~ 50/60Hz
115 = 110 - 120V ~
XXkW MAX
230 = 220 - 240V ~
from a third-party home automation system or
computer
See "RS232 Connection" on page EN-9
Please read the sections "Placing The Unit", "Power" and
"Interconnect Cables" on page EN-6 before connecting
your SA10/SA20 amplifier!
PHONO GROUND CONNECTION
VOLTAGE SELECT
Connect the turntable earth lead, if required
Note that this terminal must not be
used as a safety earth
NET RS232 USB
5V 100mA
NET RS232 USB
5V 100mA
USB
This USB socket is used for software
upgrades only
See "USB Connection" on page EN-9
ANALOGUE IN
PHONO
DIGITAL IN CD PVR STB
(MM)
SAT
BD L
AV R
ANALOGUE AUDIO INPUTS
Phono (MM) and line level audio inputs
See "Phono Input" on page EN-10 and "Analogue
Audio Inputs" on page EN-10
ANALOGUE IN
PHONO
CD PVR STB
DIGITAL IN
(MM)
SAT
BD L DIGITAL AUDIO INPUTS
Optical and coaxial digital audio
connectors
AV R
See "Digital Audio Inputs" on page EN-10
EN-8
PRE-AMPLIFIER OUTPUT
Provides the pre-amplifier output for use
in a bi-amplified system.
See "Pre-Amplifier Output" on page EN-10
R L
PRE
OUT
4-16 OHMS
CLASS 2 WIRING
SPEAKER TERMINALS
See "Loudspeakers" on page EN-11
R
CLASS 2
WIRING
PRE
OUT
4-16 OHMS
SA10
SA20
L