Technical Characteristics - Pepperl+Fuchs KCT1-6SR-C Mode D'emploi

7. Connections
7.1 Terminal assignment X1
Supply voltage and outputs
Terminal AC versions
No.
1 n.c.
2 n.c.
3 Output
Common relay contact (C)
Emitter when optocoupler output
4 Output Relay
Closing contact (NO)
5 Output Relay with opening contact (NC)
Collector when optocoupler output
6 Supply voltage
90...250 V AC
7 Supply voltage
90...250 V AC
Attention: In case of a
ting (reversed relay control), the connections of terminals 4
and 5 are reversed:
Terminal No. AC- and DC- versions
4 Opening contact relay (NC)
5 Closing contact relay (NO)
Zumutbare Änderungen aufgrund technischer Verbesserungen vorbehalten.
Pepperl+Fuchs GmbH 68301 Mannheim Telefon (0621)776-11 11 Telefax (0621)776-27-11 11 Internet http://www.pepperl-fuchs.com
Only with the optional
serial interface
10...30 V DC-
versions
Operating voltage
10..30 V DC
0 VDC (GND)
and a set-
7.2 Terminal assignment X2
Inputs
Terminal Designation
No.
1 +24 VDC
2 0 VDC
(GND)
3 INP A
4 INP B
5 RESET
6 GATE
7 KEY

8. Technical characteristics

Supply voltage:
Display:
Polarity of the input signals:
Input resistance:
Counting frequency:
Minimum pulse duration for control inputs:
Input switching level:
Pulse shape:
Accuracy in the frequency meter/speed indicator mode:
Accuracy in the time counter / operating time counter mode:
Copyright Pepperl+Fuchs, Printed in Germany
AC-versions 10...30 V DC
Sensor supply Not
voltage connected
Reference Not
voltage connected
Counting input A
Counting iinput B
Reset input
GATE input
Push-button locking input
90 ... 250 V AC, 5VA max.
ext. fuse protection: T 0.1 A or
10 ... 30 V DC, 1W max.
ext. fuse protection: T 0.125 A
6 digits, red 7-segment
LED's, display height 8 mm
programmable in common for
all inputs (npn or pnp).
approximately. 10 k
20 kHz (10 kHz with phase
discriminator), can be reduced to
30 Hz. In case of automatic
repetition, 1.2 kHz without loss of
pulses (700 Hz with phase
discriminator and pulse multiplica
tion by 2).
5 ms
With AC supply voltage:
log."0": 0..4 VDC
log."1":12..30 VDC
With DC supply voltage:
log."0": 0..0,2 x UB
log."1": 0,6 x UB..30 V DC
any shape (Schmitt trigger inputs)
< 0,1 %
± 50 ppm
21