3. Open the Aqua+ housing.
Put your fingers under the top cover's side tabs and press
your thumbs on the raised sides of the base.
CAUTION
Don't damage the soft top cover with your fingernails.
TIP
You can gently bend the Aqua+ side tabs towards you,
and press alternately on the left then right side until the
base pops out.
4. Check both halves for damage (e.g. scratches, tears) or
contamination (e.g. sand, hair, sunscreen).
If it is damaged, use a new Aqua+.
CAUTION
Anything that affects the seal may cause water to leak in
and damage your sound processor.
AQUA+ FOR KANSO
™
USER GUIDE
5