Care And Storage - Cochlear Nucleus Aqua+ Mode D'emploi

After you get wet...

Care and storage

1. Rinse Aqua+ with clean water and dry with a soft cloth.
2. Open the Aqua+ top cover and remove your sound
processor.
3. Place your Aqua+ in your dry aid kit overnight.
4. Once it's thoroughly dry, put the two halves together and
test the seal by pressing down on the top:
• If any air leaks out, you should not use it again.
5. If the seal is ok, separate the two halves again and place
your Aqua+ in your storage case or the Kanso Activity
Kit's waterproof case until you want to use it again.
AQUA+ FOR KANSO ™ USER GUIDE 11