Functions When Starting; Serial Number; Firmware Version; Last Calibration Date - FUTURO 136750 F4 Mode D'emploi

34

9.17 Functions when starting

The instrument function that is immediately available when star-
ting the instrument can be selected using the buttons shown.
- CONST:
- DIST:
- DIA:
- MIN:
- MAX:
- DELTA:

9.18 Serial number

Used to indicate the serial number of the instrument.
The buttons shown can be used to indicate the model and the
measurement range.

9.19 Firmware version

Used to indicate the version number of various firmware installed
on the instrument.
- MODULE: Firmware of display unit
- MAINBRD: Firmware of machine
- SENSOR:
By pressing the corresponding button you can go to the various
firmware versions.

9.20 Last calibration date

Used to show the last date of calibration.
Format: DD.MM.YYYY
This information cannot be changed.

9.21 Next calibration date

The date for the next calibration is entered manually (Format:
DD.MM.YYYY).
Press the zero button to have the indication of Day flash so that
you can use the cursors for changing the day. The same procedure
applies to changing the month and the year.
Constant (standard value)
Vertical mode
Diameter centre distance mode
Minimum value mode
Maximum value mode
Delta mode
Firmware of probe contact system
+