Setting The Chorus Or Modulation Effect; Setting The Insert Effects - Korg C-520 Mode D'emploi

Setting the chorus or modulation effect

The chorus or modulation effect adds depth to the sound. Ei-
ther you are in Single, Layer or Split mode, a single chorus ef-
fect is available for both sounds (see diagram above). A
different amount of chorus can be applied to each sound,
thanks to the Chorus Send parameter (see below).
1.
After having pressed the EDIT button, use the SCROLL
button to go to the Chorus Type edit page, with the chorus
type selected:
Chorus Type
Chorus
Use the +/YES and -/NO buttons to select a different cho-
rus effect. See below the list of available chorus-type
effects (a more detailed list is on page 285).
Chorus
Chorus Harm. Chorus
Ensemble Flanger
2.
Press SCROLL again to select the Chorus On/Off pa-
rameter:
Chorus Type
Chorus

Setting the insert effects

In addition to the reverb and chorus effects, common to both
sounds in Layer and Split mode, an insert effect (IFX) is avail-
able for each sound (see diagram above). The insert effect
strongly modifies the sound, and is to be considered as part of
the sound itself.
1.
After having pressed the EDIT button, use the SCROLL
button to go to the IFX Type edit page, with the IFX as-
signed to the Main sound selected:
IFX M/L Type
EQ1
Editing sounds and performances > Setting the chorus or modulation effect
5
Off
Chorus Delay
Tremolo
5
Off
7
Phaser
Use the +/YES and -/NO buttons to turn the chorus on or
off. This corresponds to the status of the CHORUS indica-
tor.
3.
Press SCROLL to go to the Chorus Send edit page, with
the M (Main) parameter selected:
Chorus Send
M:127
Use the +/YES and -/NO buttons to set the amount of
chorus applied to the Main sound (0 ~ 127).
4.
If you are in Layer or Split mode, press SCROLL
to select the L (Layer/Left) parameter:
Chorus Send
M:127
Use the +/YES and -/NO buttons to set the amount of
chorus applied to the Layer/Left sound (0 ~ 127).
5.
Press the EXIT button to return to the Main page and save
the changes (see "Exit from the Sound edit mode" on
page 41), or the SCROLL
page (see below).
Use the +/YES and -/NO buttons to select a different
effect. "Off " means no effect. See below the list of available
IFX effects (a more detailed list is on page 285).
IFX
LoGain HiGain
Echo1 Echo2
Dly4th Dly3/4
Pan Trem.
AmpSim Comp.
Wah PhaTrm
OD-Wah WahAmp
2.
If you are in Layer or Split mode, press SCROLL
to select the IFX assigned to the Layer/Left sound:
IFX M/L Type
LoGain
Use the +/YES and -/NO buttons to select a different
effect.
6
L:Off
again
6
L:Off
button to go to the next edit
HLGain MdGain
Echo3
Dly8th
Phaser Rotary
Limit. Excit.
AmpTrm CmpAmp
again
7
Phaser
45