Control Change - Korg C-520 Mode D'emploi

Control Change

When you operate the damper pedal, adjust the balance in
Layer mode, or make other adjustments on the control panel,
a Control Change message is sent to a connected external
MIDI device. At the same time, C-520 can receive a Control
Change message from an external MIDI device connected to
its MIDI IN, to control the damper pedal, volume adjustment,
and other data.
Control Change enable/disable
The C-520 usually receives Control Change data. If you don't
want to receive (or transmit) them, use the Filter function. See
"MIDI Filters" on page 56.
MIDI > Control Change
61