Transport - Handling And Storage; Packaging Components - RHOSS WinPACK HE-A SE TCAEY B-S 2110 Mode D'emploi

EN
reference guide.
Acetone
Acetic acid
Acetates (all)
Amine (all)
Ammonia
Ammonium hydroxide
Amino acid
Benzene
Borax
Boric Acid
Butyl Alcohol
Butyric Acid
Calcium Chloride
Calcium Hypochlorite
Carbon tetrachloride
Cetyl Alcohol
Chlorides (ALL)
Chlorine Gas
Chrome Acid (NR)
Citric Acid
Creosote
Diesel oil
Diethanolamin
Ethyl Acetate
Ethyl Alcohol
Ethyl Ether
Fatty Acid
Fluorinated Gas
Formaldehyde <27%

TRANSPORT - HANDLING AND STORAGE

!
DANGER!
The unit must be transported and handled by skilled personnel trained to carry
out this type of work.
IMPORTANT!
Be careful to prevent damage by accidental collision.

Packaging components

!
DANGER!
Do not open or tamper with the packaging before installation. Do not leave the
packaging within reach of children.
SAFEGUARD THE ENVIRONMENT
Dispose of the packaging materials in compliance with the national or local legi-
slation in force in your country.
Each unit is supplied complete with:
installation and use instruction
Electronic control manual
wiring diagram
list of authorised service centres
warranty document
Section II :: Installation and maintenance
Fructose
Petrol
Glucose
Glycol
Glycol Ether
Hydrochloric Acid <10%
Hydrogen Peroxide <5%
Hydrogen Sulphide
Hydrazine
Hydroxylamine
Iodine
Isobutyl Alcohol
Isopropyl Alcohol
Kerosene
Lactic Acid
Lactose
Laurylsulfate
Magnesium
Maleic Acid
Menthol
Methanol
Methylene Chloride
Methyl Ethyl Ketone
Methyl Isobutyl Ketone
Mustard Gas
Naphthol
Nitric Acid (NR)
Oleic Acid
Oxalic Acid
70
Ozone
Perchloric acid
Phenol 85%
Phosgene
Phenolphthalein
Phosphoric Acid
Potassium Chloride
Potassium Hydroxide
Propyl Alcohol
Propylene Glycol
Salicylic Acid
Salt water
Sodium Bisulphite
Sodium Chloride
Sodium hypochlorite <5%
Caustic Soda <10%
Caustic Soda <10% (NR)
Sodium Sulphate
Stearic Acid
Sucrose
Sulphuric Acid <25%
Sulphates (ALL)
Sulphides (ALL)
Sulphites (ALL)
Starch
Toluene
Triethanolamine
Urea
Vinegar
Xylene