Table des Matières
Publicité
5. Retirez et jetez le couvercle du collecteur (voir ci-dessous).
6.
Suivez les instructions ci-dessous pour remplacer les
1/2" Wrench
© Travis Industries
Installation
Rear Burner Orifice
Front Burner Orifice
Use a 1/2" open end wrench
a
to unscrew the two orifices.
c
Screw each LP orifice in so the
orifice protrudes 15/16" (24mm)
(indicating full insertion).
15/16"
24mm
1/21/2019 – 1423-FR
(for qualified installers only)
orifices.
Apply thread sealant to the LP
orifices prior to installation. Use
the chart below to identify the
correct orifices.
Look here for the orifice identification
Front
Rear
b
NG
LP
#48
1.25mm
#39
.0625"
864HO GSR2
53
Publicité
Table des Matières
