Shimano Steps EP800 Série Mode D'emploi page 60

INSTALLING THE DRIVE UNIT AND PERIPHERAL PARTS
Installing the chainring unit and crank arms
(2) Tighten the lock ring while firmly pressing the left crank.
TECH TIPS
• An impact wrench cannot be used.
6.
Set the right crank arm and tighten the cap.
7.
Secure the right crank arm.
(1) Press the stopper plate in.
* Check that the plate pin is firmly set.
R
Right crank arm
35 - 45 N·m
Lock ring
0.7 - 1.5 N·m
Cap
38