Shimano Steps EP800 Série Mode D'emploi page 42

INSTALLING ELECTRICAL PARTS
Electric wires
(2) Disconnect the electric wire from the E-TUBE port.
* As shown in the figure, use part (A) of the TL-EW300 as leverage for support and move
it like a lever, then disconnect it.
TECH TIPS
• If there is limited space to insert the tool, you can use the TL-EW300 as indicated
in the figure to disconnect the electric wire.
` Connecting the electric wire (EW-SD50)
Connect the electric wire to the E-TUBE port.
(1)
20
(2)
(A)