• The answering machine cannot be operated remotely:
- You're entering an incorrect remote code. Check the
remote code or program a new code (see paragraph
10.2)
- You're trying to listen to the answering machine using
a pulse (rotary dial) phone. For operating the answering
functions remotely, you can only use a DTMF phone
(you'll hear key tones when pressing numeric buttons).
16.6 OTHER:
• The wired telephone emits a beep tone every 60
seconds:
- This is a notification to tell you that new messages are
registered in the answering machine. After listening to
these messages, the beep tone will stop.
• The display stays blank
- The power adaptor is not connected or removed from
the wall socket. Please connect again.
• The connection between the telephone and wireless
handset is lost:
- The wireless handset is too far from the telephone;
please move closer.
- The handset is switched off. Check and switch on.
- the handset is not (no longer) registered on the tele-
phone; please register/re-register (see paragraph 14.2).
In case the failure has not been solved with
aforementioned solutions:
• Remove the batteries from the handset, and unplug
the power supply adapter and the phone connector
from their sockets; connect everything again after sev-
eral minutes.
207