Fysic FX-8025 Manuel D'utilisation page 206

Masquer les pouces Voir aussi pour FX-8025:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

16.3 DURING CALLING:
• Beep tones during an intercom call:
- You are called from outside during an intercom call;
end this call, wait until the phone rings normally and
answer the call.
16.4 CALLER IDENTIFICATION:
• You do not receive Name or Caller Identification infor-
mation on the display of your handset.
- Check whether your carrier transmits these signals
(you shall subscribe to this service with some providers).
• You do receive the numbers on the display of your
phone, but not the name.
- The carrier does not forward names; consult your car-
rier for this.
- The name has not been programmed in the memory
of your handset; program it. (see paragraph 6.2)
- The name has been programmed in the memory,
but the accompanying phone number has been pro-
grammed without area code; program the number
including area code.
16.5 ANSWERING MACHINE:
• No incoming messages are (no longer) being registered:
- The answering function is disabled, please enable it
(see paragraph 9.4)
- The recording capacity is full (the
rapidly). Listen to your messages and delete some of
them (see paragraph 9.8)
• No Memo message can be recorded:
- The recording capacity is full (the
rapidly). Listen to your messages and delete some of
them (see paragraph 9.8)
206
light is flashing
light is flashing

Publicité

Table des Matières
loading

Table des Matières