Lcd Display; Stitch Patterns - Janome 49018 Manuel D'instructions

LCD Display

The LCD display shows the following information when the
machine is turned on.
q Stitch pattern number
w Cursors
e Stitch width
r Stitch length
z Press the cursor keys
under the stitch pattern number.
The cursors appear under both digits when turning
the power on.
x Press the value set keys
pattern number until the pattern number of the desired
stitch is indicated.
The number will increase or decrease by 1 each time
you press the value set key.
c Press the
key to move the cursor under the tens
digit of the stitch pattern number.
The number will increase or decrease by 10 each
time you press the value set key.

Stitch Patterns

* The alphabet under the stitch pattern indicates the
suitable presser foot type for the selected stitch pattern.
to move the cursor
to change the stitch
q
w
z
x
c
38
e r