Machine Operating Buttons - Janome 49018 Manuel D'instructions

Machine Operating Buttons

q q q q q Start/Stop Button
Lower the presser foot lifter.
Press the start/stop button q to start the machine.
The machine starts running slowly for the first few
stitches; it then runs at the speed set by the speed
control slider.
Press the start/stop button q again to stop the machine.
NOTES:
•The machine runs slowly as long as you press and hold
the start/stop button q.
•The start/stop button q cannot be used when the foot
control is connected to the machine.
w w w w w Reverse Stitch Button
When stitches
machine will sew in reverse while the reverse stitch button
w is pressed.
If you press the reverse stitch button w when sewing any
other stitches, the machine will immediately sew locking
stitches and automatically stop.
If you press the reverse stitch button w when stitch
pattern 00, 01, 10, or 11 is selected and the foot control is
not connected, the machine will sew in reverse as long as
the button is pressed, and the machine will stop when the
button is released.
e e e e e Auto-lock Button
When stitches
machine will immediately sew locking stitches and
automatically stop when the auto-lock button e is
pressed.
If you press the auto-lock button e when sewing any
other stitches, the machine will sew locking stitches at the
end of the current pattern and automatically stop.
r r r r r Needle Position Up/down Button
Press this button to bring the needle up or down.
The machine will stop with the needle up or down
depending on the needle position determined by this
button.
(00, 01, 06, 07) are selected, the
(00, 01, 06, 07) are selected, the
e r
w
q
q
w
e
r
10
y
t