Disposing Of Packaging; Disposing Of The Product; Environmental Protection; Glossary - HASE LIMAiQ Mode D'emploi

Problem Possible cause
Temperature sensor
Measuring incorrect
temperature:
Sensor defective.
gStove not burning.
Connected incorrectly.
gStove burning at max.
Cable break, software
gStove cannot be adjusted.
bug, controller broken.
Power failure.
9 Disposal

9.1 Disposing of packaging

Your stove is wrapped in plastic film on delivery. Recycle the plastic.
For additional information on proper packaging disposal and the available
return options for waste packaging, please contact your city or municipality.

9.2 Disposing of the product

The stove can be disposed of as follows:
► The stove can be dismantled to ensure proper disposal.
Please consult your HASE authorised dealer.

10 Environmental protection

10.1 Recycling and reuse
INFO: RECYCLING
Blue Angel" certified stoves are designed to ensure materials can be sepa-
"
rated and used separately:
► Please contact your HASE authorised dealer to ensure
your stove can be professionally dismantled and reused.
Solution
Contact HASE authorised
9
dealer.
Check power supply.
9

11 Glossary

Designation
Damper
Firebricks
Supply pressure (chimney airflow)
Chimney airflow
Pilot fire
Flue pipe
Smoldering
Combustion air
Deflagration
Sootiness
Thermal output
Fire place stove for temporary burning
Definition
Cut-off in the flue gas path to reduce an
elevated supply pressure.
Internal firebox cladding made from
vermiculite for insulation.
The required supply pressure ensures the
flue gases are extracted properly and the
necessary amount of combustion air is
delivered.
Physical process which ensures flue gases
flow outside.
A quick lighting fire to build the chimney
draughts in order to overcome unfavourable
operating states such as cold air inside the
chimney.
Connection piece between a fireplace stove
and a chimney.
Removes exhaust gases from a firing
system.
Slow burning without open flames with
heavy smoke developing.
The air a fireplace stove is supplied during
operation.
Sudden combustion of wood gas accumula-
ted in the combustion chamber.
Brown spots on the mantle block of the
chimney due to condensation are
caused by the flue gas temperatures being
too low and can result in a chimney fire.
Usable thermal energy produced during the
fuel transformation process.
Fireplace stove where only one layer of fuel
is continuously being added over a period of
approx. 45 min.
en
115