Switching On And Off; Display During Operation - Boneco S200 Mode D'emploi

HANDLING

SWITCHING ON AND OFF

The BONECO S200 is operated manually. The appliance
will run until the control knob is moved to the "0" position.
If the water tank is empty, automatic shut-off prevents
the appliance from overheating or becoming damaged.
1. Switch on the BONECO S200 by moving the control
knob from the "0" position to the "I" position.
2. Increase the humidity output by moving the control
knob to the "II" position.
3. Switch off the appliance once the desired humidity
has been reached.

DISPLAY DURING OPERATION

The LED ring on the control knob indicates the operat-
ing state.
Blue (constant): The appliance is functioning normally;
there is water in the tank.
Red (constant): The appliance is switched on. However,
the humidifying function has been switched off automati-
cally because the water tank is empty.
Blue (pulsing): Cleaning mode is active.
7
en