Manual Handling; On Manual Handling; Auto Mode; Adapted Auto Mode - Boneco H400 Mode D'emploi

12

MANUAL HANDLING

en

ON MANUAL HANDLING

Manual handling works conveniently by the knob
on the front side. The BONECO app offers additional,
extensive options for control and automation of the
BONECO appliance.

AUTO MODE

If you have never operated the BONECO appliance
with the BONECO app and switch it on for the first
time, it starts up in AUTO mode. The appliance is pre-
set to a target relative humidity of 50 percent. The
performance level is automatically adapted to the
current humidity: The drier the air, the higher the
performance level.
If the preset target humidity is exceeded, the appli-
ance switches to standby mode, which is indicated
by the pulsing LED.
If the humidity drops below the set level, the BONE-
CO appliance resumes operation.

ADAPTED AUTO MODE

If you have already operated the BONECO appliance
with the BONECO app and set a different humidity,
that value is automatically taken over when the ap-
pliance is switched on.

SWITCHING ON AND OFF

1. Briefly press the knob once to switch on the
BONECO appliance.
The appliance is always in AUTO mode when it is
switched on. You can identify active AUTO mode by
the small LED that lights up above the knob.
2. To switch off the BONECO appliance while it is in
AUTO mode, briefly press the knob once.