Manual Operation; On Manual Operation; Auto Mode; Adapted Auto Mode - Boneco H300 Manuel

10
MANUAL OPER ATION
en

ON MANUAL OPERATION

The BONECO H300 offers extensive possibilities for con-
trol and automation, which are controlled by the BONECO
app. Furthermore, some basic functions are available that
you can control manually using the knob on the front.

AUTO MODE

If you have never operated the BONECO H300 with the
BONECO app and switch it on for the first time, the appli-
ance will operate as a humidifier and air purifier in AUTO
mode. The appliance is preset to a target humidity of 50
percent. The performance level is automatically adapted
to the current humidity: The drier the air, the higher the
output level.
If the preset target humidity is exceeded by 2 percent, the
appliance switches to standby mode, which is indicated
by the pulsing LED:
If the humidity drops below the set level, the BONECO
H300 resumes operation.

ADAPTED AUTO MODE

If you have already operated the BONECO H300 with the
BONECO app and set a different humidity, that value is
automatically taken over when it is switched on.

SWITCHING ON AND OFF

1. Briefly press the output regulator once to switch on the
BONECO H300.
The appliance is always in AUTO mode when it is swit-
ched on. You can identify active AUTO mode by the small
LED that lights up above the output regulator.
2. To switch off the BONECO H300 while it is in AUTO
mode, briefly press the output regulator once.