Filling The Tank; Rotary Switch; Switching On/Off - Boneco W1355A Instructions D'utilisation

Filling the tank

Do not operate the appliance when the water
tank is empty!
• Remove the water tank (12).
• Ensure that there are no foreign objects in the water
tank.
• Remove the water tank cap from the tank (13). Fill the
tank with fresh, cold tap water (14). Fully close the
tank cover to prevent the water tank from leaking (14).
Place the water tank on the water base (15). Do not
add any additives to the water!
• Do not pressurize the water tank, e.g. by filling it with
carbonated mineral water.
• Connect the power cable to the power supply and
switch the appliance on.
The appliances are fitted with an automatic cut­off switch.
As soon as the water base is empty, the unit switches off
automatically. The empty indicator illuminates (also see
section "Operation").
Do not pressurize the water tank, e.g. by filling it
with carbonated mineral water. Do not add any
essential oils or scents to the water; this may
discolor or damage the plastic material. Completely close
the screw seal to prevent the water tank from leaking.
20
Water quality maintenance (ISS)
The Ionic Silver Stick ® (ISS) utilizes the antimicrobial prop­
erty of silver and provides one season of optimum water
quality maintenance in all BONECO humidifiers. The ISS
begins working as soon as it comes into contact with wa­
ter – even if the unit is switched off. The ISS is intended
exclusively for use in humidifiers. Look at picture 11 for the
position of the ISS in the appliance.
Lifecycle indicator
Your appliance comes with a standard lifecycle indicator
on the back of the upper part for changing the Ionic Silver
Stick ® . To remind yourself of when you put the ISS into
operation, please cross the current month on the indicator
and write the current year on the line provided.
Operating W1355A
B C D E
A
A) Rotary switch
Connect the appliance to the power supply and turn rotary
switch A to position C or D as required. To switch the appli­
ance off, turn the rotary switch to position B.
B) Switching on/off
If the rotary switch is in position B, the appliance is switched
off.
C) Night mode
If you turn the rotary switch to position C, the appliance
works in night mode and is especially quiet.
D) Normal mode
If you select position D, then normal mode is set, and the
appliance reaches maximum humidity output.
E) Operating light
The green light (LED) (E) illuminates when the appliance
is switched on. When the water level is low, the appliance
automatically switches off. The LED display changes from
green to red. The appliance automatically continues operat­
ing when filled with water.