In The Event Of Problems - Breitling BENTLEY SUPERSPORTS B55 Mode D'emploi

• Do not forget to push the crown back to neutral position 1.
In order to reactivate the watch, it must be charged using the cable provided.

19. IN THE EVENT OF PROBLEMS

If the watch no longer responds or in the event of connection issues with the smart-
phone, the watch may require resetting, as follows:
• Select the function by turning the crown.
BATTERy
• Pull the crown to position 2; the upper screen displays
; select by turning the crown.
SLEEP DEEP SLEEP
• Give P1 a long press to confirm the extended standby. The hands will «park»
immediately. Once the procedure is finished, the display turns off and the
electronics are disconnected.
• Do not forget to push the crown back to neutral position 1.
• To reactivate the watch, connect the charger cable. The watch is thus reset. All
settings will be lost during this operation.
It is important to note that the watch's connection with the smartphone may
become somewhat unstable when in presence of multiple Wi-Fi and/or Bluetooth
signals.
or
DEEP SLEEP
152
20. LIST OF WORDS IN THE USER INTERFACE
The list below explains all the texts that may appear in the upper screen through
the user interface.
24H
ACTL xx
ALX AM
ALX OFF
ALX ON
ALX PM
SOFT
ALXTEST
ALARM SIGNAL
ALLDAyS
AM
AM / PM
ARABIC
BAT XX%
BAT100%
BATTERy
BEST XX
BOTH
BUZZER
®
CALL
CANCEL
zone display in 24 hour mode
time measured for a regularity rally
alarm x activated in AM mode
alarm x deactivated
alarm x activated
alarm x activated in PM mode
testing alarm x
choice of alarm signal
alarm active every day
zone display in 12 hour ante meridiem mode
12 hour display with AM and PM indicator for TIME, TIME 2 and the alarms
weekly format according to "Arabic" standard
battery charge status percentage
battery fully charged
battery mode
best lap (in LAP mode)
buzzer and vibrate for the alarms
audible alarm
notification of a phone call
erasing a stage (rally)
153