Breitling BENTLEY SUPERSPORTS B55 Mode D'emploi page 58

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3.
: setting the duration for the lighting to be switched on when the crown
LIGHT
is pressed.
4.
: choice of digital LCD behavior – readable all the time even without
DISPLAy
lighting or readable only with lighting.
5.
: Option of reducing the light intensity to a minimum and disabling
NIGHT MODE
the
mode as well as notifications between 24:00 and 06:00. On the one
TILT
hand, this function makes it possible to reduce consumption and on the other,
to avoid the lighting being too bright in the dark.
6.
: audible confirmations connected to pushpieces, with or without hourly
TONE
time signal or signal for full timekeeping hours.
7.
: exit parking the hands mode after 5 minutes or simply with a double
HANDPRK
press on the crown.
8.
: option of disabling the following functions:
MODE
9.
: activation and deactivation of the BLE (Bluetooth
CONNECT
connection.
Please note that as soon as the
SETTING
position 2, the hour and minute hands "park" in order to facilitate the readability
of the two screens.
,
and
RALLy
RACE
RGRALLy
®
Low Energy)
mode is activated by pulling the crown into
110
a)
SyNCHRO
The time shown on the analog display (hands) and that shown on the digital
display (screens) must be perfectly synchronized. In the event of the two displays
being completely out of synchronization (following a shock or accidental stop), the
analog display on the digital indicator is adjusted as follows:
• Select the
SETTING
• Pull the crown into position 2 (the hour and minute hands will "park").
• Select
SyNCHRO
• Press P1 to activate the setting: the hands will align themselves on the digital
display on the lower screen.
• If there is an inconsistency, turn the crown to position the seconds hand at 12
o'clock and confirm by pressing P2.
.
• Set the minute hand, and then the hour hand, and confirm by pressing P1.
• Press the crown back to neutral position 1.
b)
(
or
TILT
ON
OFF
• Select the
SETTING
• Pull the crown into position 2 (the hour and minute hands will "park").
function by turning the crown.
by turning the crown.
)
function by turning the crown.
111

Publicité

Table des Matières
loading

Table des Matières