• The total time on the lower screen with the indication
screen.
• The date of the race on the lower screen with the indication
upper screen.
• The start time of the race on the lower screen with the indication
the upper screen.
• The different intermediate target times on the lower screen with the
indication.
• The different intermediate times measured on the lower screen with the
indication
xx.
ACTL
• The advance or lag time for each stage on the lower screen with the indication
xx,
xx or
xx.
LATE
EARLy
GOAL
f) Erasing information from the regularity rally
To erase the active race, give a long press on P1 (erasing the times recorded but
not the target times –
followed by
ERASE
erasing –
followed by
EMPTy
SET RLy
g) Recovering times
If the watch is connected to a smartphone, different times recorded may be
recovered through the application on the smartphone.
on the upper
RGRALLy
RGRDATE
RGSTART
) or a long press on P2 (complete
READy
).
144
15. COUNTDOWN (
a) Setting (
on the
•
Select the
•
Pull the crown into position 2 (
on
(
), minutes (
HOUR
59 minutes and 59 seconds, confirming it each time by pressing P2.
xx
SPLIT
•
Adjust the type of alarm signal desired (
alarm),
the crown and confirming by pressing P2.
•
Press the crown back into neutral position 1.
b) Use
•
Pressing P1 will start the timer (
•
Pressing P1 a second time will stop it (
it (
TMR RUN
•
When the timer is working, a long press on P2 will reset the original settings
(
).
RESET
During the last 3 minutes, the seconds hand counts counter-clockwise the seconds
and a beep is emitted every second for the final 10 seconds. At 0, an alarm sounds
)
TIMER
)
SET TMR
function by turning the crown.
TIMER
) and turning the crown, adjust the hours
SET TMR
) and seconds (
MINUTE
SECOND
ALARM SIGNAL
(vibrating, silent alarm) or
VIBRATE
).
TMR RUN
TMRSTOP
).
145
) up to a maximum of 99 hours,
display):
(sound
BUZZER
(both together) by turning
BOTH
), while pressing again will restart