Making Coffee - LAVAZZA Espresso Point EP MINI Mode D'emploi

EN
DISPENSING COFFEE
The machine will not supply the product until it
reaches the operating temperature. The supply
button will blink during the heating phase.
The machine will be ready for use when the lever
is set to the rest position and the supply button co-
mes ON steadily.
Position the cup under the coffee spout.
1
If you want to use cups, small cups and containers
of different size, you can remove the upper drop
holder tray.
Raise the capsule loader lever and place the
2
capsule in the capsule insertion space applying
light pressure.

MAKING COFFEE

Never put fingers or objects in the pod-holder. Only
compatible capsules must be introduced in the
pod-holder.
Lower the capsule loading lever.
3
The machine features a free dosing button.
4
Press the Espresso supply button. The button
used will come on and blink when coffee is sup-
plied.
Never raise the capsule loading lever during supply.
Once the desired amount is obtained (max
120cc), stop the coffee supply by pressing the
coffee supply button again.
If the supplied dose is smaller than the desired one,
switch the machine off and, then, on again by me-
ans of the master switch. Next, proceed again with
the supply by pressing the button available.
STAND-BY
The machine will, after it has not been operated for
30 minutes, enter the stand-by mode; more over,
the free dosing button will be blinking.
To start the machine again, press the supply but-
ton or open the capsule feed lever.
Free dosing